Q: What is pre-treating?

A: Pre-Treating is the process of preparing a garment with a PT (pre-treatment) fluid eithe rmanually or with an automatic device such as the Viper. This PT process acts like a "sealer" or "primer" on the shirt just like primering drywall so the paint doesn't soak into the drywall. The PT is the primer that will allow the white ink to sit on top of the garment and not soak into the fibers of the shirt.

Q: Why do I need to pre-treat?

A: If you do not pre-treat a garment, when you print the white ink it will soak into the shirt and not give you a good, bright, white ink. This will also affect the CMYK ink vividness too.

Q: Can I pre-treat by hand?

A: The answer to this is yes, but there are several issues when trying to do it by hand:
It is not easy to get the required amount of fluid laydown evenly over the entire printed area.
It is messy. People try to do it with a Wagner power sprayer
It is nearly impossible to achieve a good, consistent laydown of PT Fluid which is of utmost importance for good white ink DTG printing.
It is much slower than an automatic Pre-Treatment machine
There is much more wasted pre-treatment fliuid when trying to do it by hand.

Q: How can the Viper XPT-600 help my business?

A: The Viper is an automatic pre-treater to make the preparation of your garments easier, faster, and more cost effective.
The Viper is very fast - usually less than 10 seconds cycle time to spray the garment.
Easily set the spray length from the touch screen.
Quickly change the spray pattern from the touch screen to do either full chest, left chest, right chest, youth or even a custom user spray zone selector.
Consistently laydown the exact amount of pre-treatment EVERY TIME (this is very important).
Much quicker and easier - saves you on labor costs.
Save on pre-treatment - due to our unique and patent pending spray process you will save money on your pre-treatment solution.

Q: Why Should I Choose the Viper XPT-6000?

A: There are other options out there for pre-treating your garments, but here are some reasons as to why you shouldl choose the Viper:
The Viper XPT-6000 is ready to use right out of the box.
The Viper XPT-6000 includes all needed accessories, including the stand.
The Viper XPT-6000 utilizes an industry first - touch screen interface to control spray length, fluid laydown, spray zones.
The Viper XPT-6000 uses our patent pending independent zonal spraying to save you money on pre-treatment fluid.
The Viper XPT-6000 has a multi-lingual interface.
The Viper XPT-6000 is easy to set and changae spray length and width control.
The Viper XPT-6000 Incliudindividual job counter and overall machine counter.
The Viper XPT-6000 is fast - Less than 10 second spray cycle.
The Viper XPT-6000 gives consistent and accurately pre-treated garments.
The Viper XPT-6000 saves time and money on labor and pre-treatment.
The Viper XPT-6000 is easy to load and unload for fast spray times.

Q: Where can I purchase the Viper XPT-6000?

A: I-Group Technologies has distributors throughout the world. Please see the Purchase page for more information.