VIPERONE SPRAY VALVE DISASSEMBLY & CLEANING GUIDE
If you are experiencing a bad spray pattern for the ViperONE there
are several potential issues, however, poor cleaning of the ViperONE
will result in restricted fluid flow and thus a poor spray patt...
METHODS OF APPLYING PRETREATMENT
There are several ways you can pretreat shirts for Direct-to-Garment
printing. The three main methods are:
* Using a roller and manually applying pretreatment to the selected
area.
* Utilizing a HPLV sprayer l...
Keywords: spray tip, nozzle, clogging, wear, spray pattern,
contaminents, clean, cleaning, pretreatment clog
The nozzle tips of any spray system are a wear item in the Viper XPT
and will over time due to a variety of factors, erode the spray tip
causing poor spray patterns. Below are several of the common factors
that can cause spray tip degradation and poor ...
