Simple To Use Controls
Using the simple controls on the front panel, set the spray length (from 2-24") and then the amount of fluid applied (10%-100%). We include a simple chart on the top of the unit to accurately tell you how to set the Speed to achieve the desired amount of pretreatment for your shirt. It is quick and easy.
Simple Fluid Management
Simply connect your pretreatment, clean water, and CLEANING SOLUTION. By pressing the corresponding buttons, that fluid is pushed through the system. To load the pretreatment, simply place a bottle under the spray nozzle and press the RED pretreatment button.
Easy Laser Alignment
The built in line laser allows for fast and easy visual alignment of garments, pockets and other pretreating locations. Pretreating in the correct spot on the garment has never been easier.
Adjustable Spray Area
The easily adjustable spray head allows for instant changing of the spray width and location with adjustments left to right as well as up and down. Fast and easy adjustments with a spray area up to 20" x 24".
"The Image Armor XPT-1000 Pretreater will pay for itself in just a few weeks compared to any other pretreater on the market. The labor savings of having an open system are evident after just 10 minutes of pretreating batches of shirts."
- Customer Testimonial - Chicago DTG
VIPER XPT-1000 SPECIFICATIONS
- Dimensions (Complete Unit)
- 33.5" wide x 36.5" deep x 6.875" high
- Shipping Dimensions
- Box #1: Spray Unit and Platen - 50 lbs
- 14" wide x 39" deep x 20" high
- Box #2: Spray Base - 32 lbs
- 38" wide x 40" deep x 10" high
- Box #1: Spray Unit and Platen - 50 lbs
- Power Requirements: 120VAC or 220VAC (24V Power Supply)
- Fits on 24" deep table
- All Electric - Easy to Use
- Retail MSRP:
- $2,495.00 as shown (+ shipping)
The Viper XPT-1000 - The Next Evolution in DTG Pretreating
The Viper XPT-1000 pretreatment machine is the next evolution in direct to garment pretreating. It is a totally new concept and engineered to give you the best, most efficient way to pretreat your DTG garments.
Even though it is an "open" design, we've taken our many years of experience in manufacturing pretreatment machines and expertise in fluid dynamics to create a unique and easy to use machine that is more efficient than other machines in the market - and at a price that is affordable for every DTG shop. Now there is NO EXCUSE for continuing to pretreat by hand. And the spray STAY IN the spray area - not all over your shop.
This pretreatment machine is super-simple to use. You can set the spray width (by adjusting the spray head height) and location of the spray (by moving the spray head left to right). Using the simple controls on the front panel, set the spray length (from 2-24") and then the amount of fluid applied (10%-100%). We include a simple chart on the top of the unit to accurately tell you how to set the Speed to achieve the desired amount of pretreatment for your shirt.
The Viper XPT-1000 - Easy and Fast Fluid Management
Proper maintenance and cleaning of your pretreatment machine is key to making sure you get a long and productive life from your equipment. Pretreatment by nature can be hard on any piece of equipment. We've taken our popular cleaning routine from the ViperONE and applied it to our XPT-1000.
With three simple fluid inputs, fluid management is fast and easy. Simply connect your pretreatment, clean water, and CLEANING SOLUTION to the XPT-1000. By pressing the corresponding buttons, that fluid is pushed through the system. To load the pretreatment, simply place a bottle under the spray nozzle and press the RED pretreatment button. You'll see the pretreatment being sucked through the lines and into the spray head. At the end of the work day, put your bottle back under the spray nozzle, press the CLEAN button for about 10 seconds and then the WATER button for 10 seconds. The system will flush the pretreatment and cleaning solution through the Viper leaving your Viper XPT-1000 ready to sit until the next time you need to pretreat. There is no need to remove the spray tip daily.
CALL TO PLACE YOUR PRE-ORDER TODAY WITH YOUR DEALER
We will start shipping units the week of July 5th, 2016 to customers in the United States only. Call and talk to your DTG dealer today to get yours pre-ordered today. If your dealer does not carry the Viper XPT line of pretreatment machines, call 877-673-4378 to get yours ordered today!
Made in the USA
We are proud to say we have been building all our pretreatment machines in Ohio since 2008.